At Saiyan Electric, we design and install commercial EV charging stations for businesses, office complexes, retail centers, apartment communities, and commercial parking facilities throughout Downey, CA. Our licensed electricians handle everything from single-station installations to multi-port charging networks, including all electrical upgrades, permit coordination, and utility interconnection, so your property is ready for the growing number of EV drivers on the road today.
Licensed electricians • Same-day service available • No obligation
EV adoption in California is accelerating, and drivers now expect charging access at workplaces, retail centers, and commercial properties. Businesses that install EV charging stations attract more tenants and customers, improve employee retention, and stay ahead of evolving state requirements.
Commercial EV charging is one of the fastest-growing infrastructure upgrades in Southern California, but success depends on proper electrical planning. Most installations require dedicated circuits, sufficient panel capacity, and sometimes service upgrades before chargers can operate reliably.
Saiyan Electric handles the full electrical scope of commercial EV charging installations, from load calculations and panel assessments to final inspection, ensuring your system is safe, compliant, and ready for long-term use.
Most commercial properties in the Downey area can support EV charging, but few are ready for it without some level of electrical work. Here is what typically needs to be evaluated before installation begins.
Level 2 chargers often require 40 to 80 amps each. Many existing panels were not designed for this load. We run a load calculation to determine if a panel upgrade or service increase is needed.
Each EV charger requires its own dedicated circuit. Using shared circuits is not code-compliant and can cause reliability issues. We install proper dedicated infrastructure for every station.
Parking areas are often far from the main panel. Long runs require correct wire sizing, weatherproofing, and code-compliant routing, all planned to minimize disruption.
Older service entrances may not support multiple chargers. In some cases, a utility-coordinated upgrade is required. We coordinate directly with utilities when needed.
Installing a single charger without planning for growth increases future costs. We design systems with scalability in mind so additional chargers can be added without major rework.
Saiyan Electric provides end-to-end electrical services for commercial EV charging projects of all sizes.
Before any hardware is installed, we assess your property’s electrical capacity, parking layout, and projected demand. We provide a detailed load analysis and infrastructure plan so you understand the full scope before committing.
Level 2 charging stations (240V) are the standard for commercial properties, delivering a full charge in four to eight hours. We install chargers in office parking lots, retail centers, apartment communities, hotels, and other commercial settings, handling all wiring, conduit, mounting, and circuit work.
For high-traffic locations such as fleet facilities, transit hubs, and retail destinations, DC fast chargers deliver significant charge in 20 to 45 minutes. These installations require larger electrical infrastructure and careful utility coordination, which we manage end to end.
If your existing service cannot support your planned load, we upgrade panels or coordinate service increases with Southern California Edison. We handle engineering documentation, permits, and utility requirements.
We install all required circuits, conduit runs, junction boxes, and disconnects for each station, installed cleanly, safely, and with future expansion in mind.
When surface runs are not practical, we handle trenching and underground conduit installation to bring power to parking areas without impacting aesthetics.
For large properties, we install subpanels closer to charging zones, reducing voltage drop and simplifying future expansion.
We support ChargePoint, EVgo, and Blink systems with smart load management, billing, monitoring, and demand control features.
We handle all permits with the City of Downey and coordinate utility requirements, including SCE Charge Ready programs where applicable. Every installation is inspection-ready and fully documented.
Our EV charging installation experience covers a wide range of commercial property types throughout the Downey area.
Employee charging as a workplace benefit and tenant amenity that supports recruitment and retention.
Customer-facing charging that increases dwell time and drives repeat visits from EV-driving shoppers.
Tenant-facing charging infrastructure that meets California's multi-family EV readiness requirements and satisfies the growing expectation from renters.
Guest charging as an amenity that improves reviews, drives bookings, and meets the expectations of business and leisure travelers.
Destination charging that keeps customers on-site longer and makes your location the preferred stop for EV drivers in the area.
Fleet charging infrastructure for delivery vehicles, forklifts, and company vehicles transitioning to electric.
Public-facing charging installations for parks, civic centers, and municipal parking facilities.
Costs vary significantly based on the number of stations, distance from the electrical panel, existing service capacity, and site conditions. The following ranges are provided for general budgeting purposes.
| Service | Typical Range |
|---|---|
| Single Level 2 Charger Installation | $800 to $2,500 |
| Multi-Station Level 2 Installation (4 to 10 stations) | $5,000 to $20,000+ |
| DC Fast Charger (Level 3) Installation | $10,000 to $40,000+ |
| Panel Upgrade for EV Charging | $1,500 to $4,000 |
| Service Increase (Utility Coordination) | $2,000 to $8,000+ |
| Electrical Subpanel for Charging Area | $1,500 to $3,500 |
| Underground Conduit & Trenching | $1,000 to $5,000+ |
| Permit Coordination & Inspection | Included in project scope |
Note: These ranges are for budgeting purposes only. Contact Saiyan Electric for a free site assessment and quote.
Here’s how we deliver safe, code-compliant commercial EV charging installations from start to finish.
We evaluate electrical infrastructure, parking layout, and ADA compliance requirements alongside projected demand.
We design infrastructure tailored to your property, whether you need a small deployment or a phased multi-station buildout.
You receive a clear, itemized quote covering all work, materials, and upgrades, with phased options for larger projects.
We handle permits and coordinate directly with Southern California Edison for any required service work.
We install systems cleanly, handle inspections and approvals, and provide full documentation including panel schedules and system details.
“A commercial EV charging installation is an infrastructure investment, not just an appliance hookup. The electrical work behind it has to be sized right, installed right, and planned for growth. We make sure our clients aren’t tearing up their parking lots two years from now because the original installation ran out of capacity.” – Owner, Saiyan Electric
Commercial EV charging projects require more than electrical installation, they require planning around building demand, utility capacity, and real-world usage patterns. Saiyan Electric helps business owners, developers, and property managers turn that complexity into reliable, scalable charging infrastructure.
We install EV charging systems for office buildings, retail centers, apartment complexes, and parking facilities, ensuring proper load management, code compliance, and future expansion. Every project is coordinated to minimize disruption and pass inspection while supporting long-term performance as demand grows.
⭐⭐⭐⭐⭐
“We are pleased with the electrical work performed by Saiyan Electric. Michael, Francisco and his team were professional, efficient, and courteous. They arrived on time and explained the work thoroughly to our satisfaction. The price was reasonable, and the work was done promptly. We would recommend them for any electrical needs.”
– Aimee, Downey
⭐⭐⭐⭐⭐
“Michael and his crew really came through. These men have done a few different jobs for me over the past two years and I’ll certainly be calling them again if the need ever arises. If you are looking to get some electrical work done by licensed bonded and clean cut professionals that do a great job, give Saiyan Electric the opportunity to serve you, I think you’ll be happy you did. Cheers.”
– Donald, Cerritos
That depends on your property type, parking capacity, and the profile of your users. A general starting point for workplaces is one charging station for every 10 to 20 parking spaces, but the right number depends on your specific situation. We help you right-size your installation during the site assessment.
Not always, but often. Level 2 commercial chargers draw 40 to 80 amps per station. If your panel doesn’t have the available capacity, an upgrade will be required. We perform a load calculation upfront so you know before the project starts.
A single-station installation can typically be completed in one to two days. Multi-station projects with panel upgrades or trenching typically take three to seven business days, depending on permit timelines and utility coordination requirements.
Yes. Networked smart chargers allow you to set pricing, require user authentication, and collect usage fees. We can wire your installation to support any major commercial charging network platform.
California’s building code (CALGreen) requires EV-capable spaces, meaning conduit and panel capacity without the actual charger hardware, for new commercial construction and major renovations. For existing properties, requirements vary. We can help you understand what applies to your specific situation.
We are hardware-agnostic and work with all major commercial charging equipment manufacturers. We can advise on hardware selection based on your use case, or we can work with hardware you’ve already selected or purchased.
Whether you’re installing your first charging station or planning a multi-port charging network, Saiyan Electric has the commercial electrical expertise to get it right. We’ll assess your property’s electrical capacity, design an infrastructure plan scaled to your needs, and execute the installation with the professionalism your business deserves.
Call (310) 692-9458 or Book Online to schedule commercial EV charging installation services in Downey, CA. Trust Saiyan Electric for safe, scalable, code-compliant EV charging infrastructure that's built to last.
(310) 692-9458
info@saiyanelectric.com
Downey, Cerritos, Whittier & surrounding areas
Available for urgent electrical needs
At Saiyan Electric, we are committed to seeking first the Kingdom of God and His righteousness in all that we do. We strive to provide exceptional electrical services with integrity, professionalism, and a heart of service.